Bale is blocking the tractor with baler

[WeAreV3N0M]

Any idea how could I convince CP to NOT stop when a bale is in front of the tractor? So annoying that helper wouldn't finish the job because bales blocking the path. Thats why I have a bale pusher attached at front.

[BalticHawk]

There is no way you can prevent CP from stopping. It‘s supposed to work like this.

[Tensuko]

DIDN'T STOP before reset so there is a way to achieve it.

There is no option to turn off the object sensing.

[WeAreV3N0M]

Could you please add an exclusion to this? For example if CP identifies the blocking object as any kind of BALE, then it just continues to drive forward. It would be a useful addition.
If you make it an optional feature, people could turn it on and off at will. Balling jobs could be done with less problem, and tractors being stuck on top of bales could be avoided with a bale pusher attached to the front.
Cotton harvesters would have no such problem, as they can just push bales out of way.

[Tensuko]

Have to think about this....

[WeAreV3N0M]

Have to think about this....

I think this is a problem now. On the picture there is a bale already finished but still inside the baler.
CP wouldn't start the reversing maneuver because it thinks the bale inside the machine is a blocking object.
After removing the bale with an autoload trailer, the tractor with baler started the reverse maneuver.
Just for the record: Yes, that baler is a mod and I've been using it for a while now but NEVER had this problem before.
There must have been a change after CP version 7.1.2.0 because I had no problem with that version.

[Tensuko]

that is already known and also ways arround it (no sharp corners and skip rows).
As I said, I need to think about a solution that fits.

And that "problem" does exist for a long time:
#1863

[Tensuko]

There is now an option to use a bale pusher and also add your own to the vehicleconfig.xml