make a new release based on current libraries / firmware

[ThomasWaldmann]

Got an email from a user with strange wifi problems which suggested that they might be fixed on newer ESP IDF.

So, guess it would be good to make a new release based on the current stuff.

[rexfue]

I guess, You should do it

…

On 15. Oct 2023, at 14:41, TW ***@***.***> wrote: Got an email from a user with strange wifi problems which suggested that they might be fixed on newer ESP IDF. So, guess it would be good to make a new release based on the current stuff. — Reply to this email directly, view it on GitHub <#469>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AFSNFB35VSHSVTG6HDK2STLX7PKZJAVCNFSM6AAAAAA6A7NWLGVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE2DGOBXGQZDCMI>. You are receiving this because you are subscribed to this thread.

[ThomasWaldmann]

@rexfue yeah, just need to install the current stuff on the macbook first.

[MMBytes]

Hi @ThomasWaldmann, any chance for a new release? Thanks

[ThomasWaldmann]

@MMBytes last time I tried I ran into strange build issues I couldn't resolve.

I'll try again soon....

[MMBytes]

@MMBytes last time I tried I ran into strange build issues I couldn't resolve.

I'll try again soon....

Thank you!

[MMBytes]

Hi @ThomasWaldmann, any luck with this?
Many thanks

[eku]

As I understand it, no version for Espressif's SDK is specified in platformio.ini and therefore the latest version is automatically used. However, this is not compatible with the source code version.

There is nothing wrong with using an older version. But which one?

Pinning the versions in platformui.ini solves my compilation problem

platform = espressif32@6.7.0
....
  h2zero/NimBLE-Arduino@1.4.1

Linking .pio/build/geiger/firmware.elf
Retrieving maximum program size .pio/build/geiger/firmware.elf
Checking size .pio/build/geiger/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [==        ]  21.6% (used 70692 bytes from 327680 bytes)
Flash: [====      ]  41.8% (used 1398045 bytes from 3342336 bytes)
Building .pio/build/geiger/firmware.bin