diff --git a/guides/choosing-a-client/readme.md b/guides/choosing-a-client/readme.md new file mode 100644 index 0000000..eebba6d --- /dev/null +++ b/guides/choosing-a-client/readme.md @@ -0,0 +1,164 @@ +# Choosing a Client + +This guide explains how to choose between ruby:`Async::HTTP::Internet`, ruby:`Async::HTTP::Client`, and higher-level interfaces for libraries. + +ruby:`Async::HTTP::Internet` and ruby:`Async::HTTP::Client` use the same request and response model. The important differences are how destinations are selected, where connection settings are applied, and who owns the client life cycle. + +## Quick Decision + +| Situation | Interface | Why | +| --- | --- | --- | +| Requests may target different origins and the defaults are suitable. | Shared ruby:`Async::HTTP::Internet` | Selects and reuses a client for each origin automatically. | +| Requests may target different origins, but need common client options or explicit ownership. | Explicit ruby:`Async::HTTP::Internet` | Applies the same options to each managed client and can be injected or closed early. | +| Requests repeatedly target one configured origin. | ruby:`Async::HTTP::Client` | Exposes the endpoint, protocol, retry, and connection-pool configuration directly. | +| A library wraps one HTTP service directly. | Injected ruby:`Async::HTTP::Client` or `Protocol::HTTP` middleware | Leaves transport configuration, ownership, and testing under application control. | +| A library models an HTTP API as resources and representations. | [`async-rest`](https://socketry.github.io/async-rest/guides/getting-started/) | Provides higher-level API modeling over an injectable `Protocol::HTTP` delegate. | +| A library uses Faraday as its HTTP abstraction. | [`async-http-faraday`](https://socketry.github.io/async-http-faraday/guides/getting-started/) | Lets the application retain the Faraday interface while using `Async::HTTP` as the transport. | + +Application code can start with the shared `Internet` interface unless it has a specific ownership or configuration requirement. Library code should accept an explicit HTTP dependency. + +## Shared Internet for General Requests + +The shared `Internet` interface is the simplest choice for requests to arbitrary URLs. It maintains one client for each origin and reuses persistent connections: + +~~~ ruby +require "async/http/internet/instance" + +urls = [ + "https://www.ruby-lang.org/en/", + "https://example.com/", +] + +Sync do + urls.each do |url| + Async::HTTP::Internet.get(url) do |response| + puts "#{url}: #{response.status}" + end + end +end +~~~ + +The class-level interface uses a thread-local `Internet` instance. Its connection pools are bound to the event loop and close when that event loop exits. The response block closes each response after it is processed. + +Use the shared interface when: + +- The application requests URLs from multiple or dynamically selected origins. +- Default retry and connection-pool settings are suitable. +- The client does not need to be injected as an application dependency. + +## Explicit Internet for Shared Configuration + +An explicit `Internet` provides the same per-origin client selection while making ownership and client options visible. Options are passed to every client it creates; for example, `limit` applies independently to the pool for each origin: + +~~~ ruby +require "async/http/internet" + +Sync do + internet = Async::HTTP::Internet.new(retries: 1, limit: 4) + + begin + internet.get("https://www.ruby-lang.org/en/") do |response| + puts response.status + end + ensure + internet.close + end +end +~~~ + +Use an explicit `Internet` when: + +- Several origins should share the same retry or pool settings. +- The client should be injected into another object or replaced during testing. +- Connections should be released before the event loop exits. + +## Client for One Endpoint + +A `Client` targets one ruby:`Async::HTTP::Endpoint`. Use it when a remote service is a stable part of the application architecture and needs its own protocol, TLS, retry, or pool configuration: + +~~~ ruby +require "async/http" + +endpoint = Async::HTTP::Endpoint.parse("https://httpbin.org") + +Sync do + Async::HTTP::Client.open(endpoint, retries: 1, limit: 4) do |client| + response = client.get("/status/200") + + begin + puts response.status + ensure + response.close + end + end +end +~~~ + +Client convenience methods accept a path rather than a complete URL. They return a response that the caller must close. `Client.open` closes the client and its connection pool when the block exits. + +Reuse a client for repeated requests rather than creating one per request; otherwise the application cannot benefit from persistent connections. + +## Building a Library That Makes HTTP Requests + +A library should generally accept its HTTP client as an explicit dependency. This lets the application configure connection limits, retries, proxies, instrumentation, and test doubles without the library creating hidden global state: + +~~~ ruby +require "async/http" + +class StatusService + def initialize(client) + @client = client + end + + def healthy? + response = @client.get("/status/200") + response.status == 200 + ensure + response&.close + end +end + +endpoint = Async::HTTP::Endpoint.parse("https://httpbin.org") + +Sync do + Async::HTTP::Client.open(endpoint) do |client| + puts StatusService.new(client).healthy? + end +end +~~~ + +The library does not close an injected client because the caller owns it and may share it with other components. If the library also provides an `open` convenience method that constructs a client, that method should close the client it creates when its block exits. + +Define the accepted interface precisely. A ruby:`Async::HTTP::Client` is bound to one endpoint and its convenience methods accept relative paths, while ruby:`Async::HTTP::Internet` selects an endpoint from a complete URL. They should not be treated as interchangeable merely because both provide methods such as `get`. If the library constructs ruby:`Protocol::HTTP::Request` objects and only calls `call`, it can accept a `Protocol::HTTP` middleware delegate instead of requiring a concrete client. + +## Modeling Resources with async-rest + +Use [`async-rest`](https://socketry.github.io/async-rest/guides/getting-started/) when a library benefits from modeling a remote HTTP API as resources and representations rather than exposing request operations directly. + +ruby:`Async::REST::Resource` accepts a `Protocol::HTTP` middleware delegate, so the application can supply and configure the transport. Its `open` method provides the complementary convenience interface: it creates a ruby:`Async::HTTP::Client`, yields the resource, and closes the client when the block exits. + +## Supporting Faraday with async-http-faraday + +Use [`async-http-faraday`](https://socketry.github.io/async-http-faraday/guides/getting-started/) when a library uses Faraday as its public HTTP abstraction or needs compatibility with the Faraday ecosystem. A new Async-native library can usually accept a ruby:`Async::HTTP::Client` or `Protocol::HTTP` middleware delegate directly. + +If a library uses Faraday, accept a configured `Faraday::Connection` rather than changing `Faraday.default_adapter` globally. The application can then select the `Async::HTTP` adapter for that connection: + +~~~ ruby +require "async/http/faraday" + +class StatusService + def initialize(connection) + @connection = connection + end + + def healthy? + @connection.get("/status/200").success? + end +end + +connection = Faraday.new("https://httpbin.org") do |builder| + builder.adapter :async_http +end + +puts StatusService.new(connection).healthy? +~~~ diff --git a/guides/getting-started/readme.md b/guides/getting-started/readme.md index 2dbe129..403901d 100644 --- a/guides/getting-started/readme.md +++ b/guides/getting-started/readme.md @@ -20,7 +20,7 @@ $ bundle add async-http - ruby:`Async::HTTP::Endpoint` describes how a client connects or a server listens, including the URL, protocol, and TLS configuration. - [`protocol-http`](https://github.com/socketry/protocol-http) provides the shared request, response, header, and body interfaces. -Use `Internet` for general-purpose requests to different hosts. Use `Client` when your application repeatedly communicates with one endpoint or needs endpoint-specific configuration. +Use `Internet` for general-purpose requests to different hosts. Use `Client` when your application repeatedly communicates with one endpoint or needs endpoint-specific configuration. See [Choosing a Client](../choosing-a-client/) for the ownership and configuration trade-offs. ## Making a Request diff --git a/guides/links.yaml b/guides/links.yaml index 89fed4c..b57e266 100644 --- a/guides/links.yaml +++ b/guides/links.yaml @@ -1,4 +1,6 @@ getting-started: order: 0 -testing: +choosing-a-client: order: 1 +testing: + order: 2