Skip to content

ApolloAutomation/ESPHome-Starter-Kit

Repository files navigation

Apollo ESK-1 Starter Kit

Apollo ESK-1

The ESK-1 is designed in collaboration with the Open Home Foundation. A portion of the profits from each ESK-1 sold goes directly to the OHF team to support their work on Home Assistant, ESPHome, Music Assistant, and other open-source smart home projects.

Key Features

ESP32-C6 Based: Built on the ESP32-C6-mini module with Wi-Fi, Zigbee, and Thread radios for versatile smart home connectivity.

Zigbee & Thread Support: Dual antennas for Zigbee and Thread protocols. Supports Matter over Thread for future-proof smart home integration.

USB-C Power: USB-C port for easy power and programming.

Expansion Ports: Two 13-pin FPC cable ports allow you to connect and power virtually any sensor or accessory.

Onboard Controls: Boot and Reset buttons for easy flashing and debugging.

Battery Powered: Includes battery connector with MAX17048 fuel gauge for accurate voltage and percentage monitoring.

Deep Sleep Support: Configurable deep sleep duration for extended battery life. Wakes periodically to report sensor values and returns to sleep.

RGB Status LED: Onboard fully addressable WS2812 LED indicates battery status:

  • Red: Battery below 40%
  • Yellow: Battery between 40-79%
  • Green: Battery 80% or above

Prevent Sleep Toggle: Easily disable deep sleep via Home Assistant for OTA updates or continuous monitoring.

Accessory Power Control: GPIO-controlled power rail for connected accessories, automatically disabled during deep sleep to conserve battery.

What's in the Kit

  • ESK-1 Main Board - ESP32-C6 with dual FPC expansion ports
  • PIR Sensor - Motion detection
  • Temperature/Humidity Sensor - Environmental monitoring
  • Notification Puck - LED and piezo buzzer PCB for visual and audio alerts
  • Button - Physical input for triggering automations

Pinout

Function GPIO
I2C SDA GPIO21
I2C SCL GPIO20
RGB LED GPIO5
Accessory Power GPIO4

ESPHome Integration

The ESK-1 is designed for use with ESPHome and Home Assistant. See the Integrations/ESPHome/ folder for the YAML configuration.

Links

Discord (Support/feedback/discussion/future products): http://dsc.gg/ApolloAutomation Shop: https://apolloautomation.com Wiki: https://wiki.apolloautomation.com Open Home Foundation: https://www.openhomefoundation.org

About

ESPHome Starter Kit

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

 
 
 

Contributors

Languages